EV2269-D-00A

New

30V, 1A, Low IQ Step-Down Converter Evaluation Board

  • 数量 价格
  • 1
    US$ 25.00 /unit

有货

Talk to an Engineer or get a Quote
Upgrade to myMPS+

Product Description

The EV2269-D-00A demonstrates MPS’s MP2269, a fully-integrated, high efficiency, synchronous step-down switch mode converter with built-in high-side and low-side power MOSFETs. MP2269 provides up to 1A continuous output current over a wide input supply range with current mode control for fast loop response.

Full protection features include over-current protection (OCP) and thermal shutdown (TSD).

TheEvaluation Board can deliver 1A continuous load current over a wide input range with excellent load and line regulation.

This part requires minimum number of external components and is available in QFN15 (2mmx3mm) package.

Product Features

  • Wide 3.3V to 30V Operating InputRange
  • 1A Continous Output Current
  • 1μA Low Shutdown Supply Current
  • 12μA Sleep Mode Quiescent Current
  • 180mΩ/80mΩ High Side/Low Side RDS(ON) for Internal Power MOSFETs
  • 350kHz to 2.5MHz Programmable Switching Frequency
  • Power Good Output
  • External Soft Start
  • 80ns Minimum On Time
  • Selectable Forced PWM Mode and Auto PFM/PWM Mode
  • Low Dropout Mode
  • Hiccup Over Current Protection
  • QFN-15 (2mmx3mm)

Parametrics

  • IC Supported 1MP2269

Monolithic IC

GET THIS IC

IC Details

The MP2269 is a frequency-programmable (350kHz to 2.5MHz), synchronous, step-down, switching regulator with integrated, internal, high-side and low-side power MOSFETs. The MP2269 provides 1A of highly efficient output current with current-mode control for fast loop response. 
The wide 3.3V to 30V input range accommodates a variety of step-down applications. A 1μA shutdown mode quiescent current allows the MP2269 to be used in battery-powered applications.
High power conversion efficiency over a wide load range is achieved by scaling down the switching frequency at light-load condition to reduce switching and gate driving losses. 
An open-drain power good signal indicates the output signal. Frequency foldback helps prevent inductor current runaway during start-up. Thermal shutdown provides reliable and fault-tolerant operation. High duty cycle and low drop-out mode are provided for battery-powered systems. 
The MP2269 is available in a QFN-15 (2mmx3mm) package.

Programmable